ANNOUNCEMENT : ALL OF ROYAL MAIL'S EMPLOYMENT POLICIES (AGREEMENTS) AT A GLANCE (Updated 2021)... HERE
ANNOUNCEMENT : PLEASE BE AWARE WE ARE NOT ON FACEBOOK AT ALL!
Scanning to route
-
pieoftheday
- Posts: 1834
- Joined: 11 Mar 2010, 16:43
- Gender: Male
Scanning to route
So when we scan our tracked at our fitting how come I can't do it for both my partner and myself on the same pda, or can I? Sorry if this has been covered
-
olilew
- Posts: 594
- Joined: 19 May 2010, 22:04
- Gender: Male
Re: Scanning to route
My partner and I have scanned them on any pda for the last 2 weeks. Nobody's said owt.
"Just take it out and see how you go......."
-
pieoftheday
- Posts: 1834
- Joined: 11 Mar 2010, 16:43
- Gender: Male
Re: Scanning to route
We've been told to only scan the ones we're going to deliver in our individual loops on our own pda's otherwise they won't show as delivered, seems odd to me. You don't do that then?
-
neviboss
- Posts: 217
- Joined: 02 Aug 2021, 16:18
- Gender: Male
Re: Scanning to route
So what happens if you don't STC, then just scan when you deliver them??? 
-
pieoftheday
- Posts: 1834
- Joined: 11 Mar 2010, 16:43
- Gender: Male
-
R5001
- Posts: 308
- Joined: 13 Jan 2022, 19:19
- Gender: Male
Re: Scanning to route
I believe the idea is that once scanned they will appear on each each pda appropriately. so if walker is walk 1, and the prepper scans all the walkers items to walk 1, they will only show on the Walkers PDA. Walk 2 (driver) and their loops should be done as "walk 2" (even though it's half of each).
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.
-
pieoftheday
- Posts: 1834
- Joined: 11 Mar 2010, 16:43
- Gender: Male
Re: Scanning to route
When they were scanned 'ready for delivery ' as they were sorted there was no issue at all, a real step backwardsR5001 wrote: ↑20 Feb 2023, 21:31I believe the idea is that once scanned they will appear on each each pda appropriately. so if walker is walk 1, and the prepper scans all the walkers items to walk 1, they will only show on the Walkers PDA. Walk 2 (driver) and their loops should be done as "walk 2" (even though it's half of each).
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.
-
R5001
- Posts: 308
- Joined: 13 Jan 2022, 19:19
- Gender: Male
Re: Scanning to route
All in the name of chasing "accurate delivery estimations"... Where people still won't be in since they're *still* at work when we deliver.... Maybe if it was a Saturday / holiday (christmas) only thing it'd be decent, no point telling people "between 2pm and 3pm" instead of "between 10am and 2pm" when they work 9am to 5pm...pieoftheday wrote: ↑20 Feb 2023, 21:40
When they were scanned 'ready for delivery ' as they were sorted there was no issue at all, a real step backwards
-
yellowbelly
- Posts: 3713
- Joined: 23 Jun 2015, 15:51
- Gender: Male
Re: Scanning to route
The PDA might not show it delivered but that has no effect on the tracking seen by the customer as long aspieoftheday wrote: ↑20 Feb 2023, 19:59We've been told to only scan the ones we're going to deliver in our individual loops on our own pda's otherwise they won't show as delivered, seems odd to me. You don't do that then?
somebody has scanned it at the doorstep as delivered/safeplaced/neigboured/739'd.
The entry just stays on the PDA until you log off. There's no warning to say 'You have undelivered parcels' or suchlike.
The whole point is to give the customer an ETA window for delivery message. If you don't make that window because
of specials or whatever - meh!
-
yubin282
- Posts: 990
- Joined: 25 Jul 2014, 19:18
- Gender: Male
Re: Scanning to route
Once I've scanned them I immediately log out.
Anything after that I get after that (missorts/lapsing) I don't scan. No problems so far.
Anything after that I get after that (missorts/lapsing) I don't scan. No problems so far.
-
pieoftheday
- Posts: 1834
- Joined: 11 Mar 2010, 16:43
- Gender: Male
Re: Scanning to route
So I can scan them all ready for delivery on my pda and my partner just scans at the door step as we used to?yellowbelly wrote: ↑20 Feb 2023, 21:58The PDA might not show it delivered but that has no effect on the tracking seen by the customer as long aspieoftheday wrote: ↑20 Feb 2023, 19:59We've been told to only scan the ones we're going to deliver in our individual loops on our own pda's otherwise they won't show as delivered, seems odd to me. You don't do that then?
somebody has scanned it at the doorstep as delivered/safeplaced/neigboured/739'd.
The entry just stays on the PDA until you log off. There's no warning to say 'You have undelivered parcels' or suchlike.
The whole point is to give the customer an ETA window for delivery message. If you don't make that window because
of specials or whatever - meh!
-
BadPostman
- Posts: 46
- Joined: 26 Jun 2015, 22:42
- Gender: Male
Re: Scanning to route
The only way ive found around this is to scan the parcel at the doorstep as ad-hoc delivery. That way only the parcel you scan shows up on the screenR5001 wrote: ↑20 Feb 2023, 21:31I believe the idea is that once scanned they will appear on each each pda appropriately. so if walker is walk 1, and the prepper scans all the walkers items to walk 1, they will only show on the Walkers PDA. Walk 2 (driver) and their loops should be done as "walk 2" (even though it's half of each).
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.
-
Seymour Buts
- Posts: 1148
- Joined: 22 Jun 2017, 20:17
- Gender: Male
Re: Scanning to route
Not the issue here, but why wouldn't you take the parcels out of the bag and deliver them all together? You're knocking the same door twice, and the walker is carrying three parcels (extra weight) for no reason.R5001 wrote: ↑20 Feb 2023, 21:31I believe the idea is that once scanned they will appear on each each pda appropriately. so if walker is walk 1, and the prepper scans all the walkers items to walk 1, they will only show on the Walkers PDA. Walk 2 (driver) and their loops should be done as "walk 2" (even though it's half of each).
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.
-
Mick100
- Posts: 274
- Joined: 04 Feb 2016, 10:00
- Gender: Male
Re: Scanning to route
I haven’t done any ready for delivery scan when you get it you get it,no one’s said anything
-
R5001
- Posts: 308
- Joined: 13 Jan 2022, 19:19
- Gender: Male
Re: Scanning to route
Obviously we avoid doing that where possible, but we're not going to notice or remember all the repeat address visits, plus the fact that small packets and letters are often in the mail and forgotten about.Seymour Buts wrote: ↑20 Feb 2023, 23:22Not the issue here, but why wouldn't you take the parcels out of the bag and deliver them all together? You're knocking the same door twice, and the walker is carrying three parcels (extra weight) for no reason.R5001 wrote: ↑20 Feb 2023, 21:31I believe the idea is that once scanned they will appear on each each pda appropriately. so if walker is walk 1, and the prepper scans all the walkers items to walk 1, they will only show on the Walkers PDA. Walk 2 (driver) and their loops should be done as "walk 2" (even though it's half of each).
In practice, it's a complete pain in the arse and the "automatic" summoning of additional scans for an address is a hassle. I get out, scan an oversized for number 4 anystreet and it brings up 3 other packets I don't have, as they're in the walkers bag... I can't delete them as I don't have them to "scan off" or however you'd describe scan-to-delete. Walker has the same issue, 3 in the bag, 1 washing machine in the van and they can't delete what they don't have (And if they could, f**k all idea which is what since barcodes are a hassle to read for a human).
whole system is a bag of s**t. Working 100% as intended, I think it'd be.... Okay, at best.